Power transmission seals,V-ring seals, globally valid

Contact Now

All-rubber V-rings are used for rotating shafts in an extremely wide range of applications. The V-ring can be used alone to protect a wide assortment of bearing types from contaminants while reliably retaining the lubricant. They are also often used as secondary seals to protect primary seals in highly contaminated environments.
V-rings are installed on shafts and their thin, tapered lip seals against a counterface perpendicular to the shaft . V-rings have an interference fit on the shaft, rotate with it and act as flingers  Angular misalignment of the shaft relative to the counterface can be tolerated .V-rings provide reliable sealing even if the shaft is out-of-round or rotates eccentrically . The amount by which the shaft can be displaced axially is governed by the permissible displacement of the V-ring relative to its counterface.
V-rings are made entirely of elastomers without fabric or metal reinforcement and are therefore easy to install. They can be stretched and, depending on size, pushed over other components like flanges, pulleys or even housings. This is a very valuable feature, especially when replacing a seal.

skf 1040 VRME R Power transmission seals,V-ring seals, globally valid

1.12 mm 7.75 kN
35 mm 1.65 mm

skf 190 VL R Power transmission seals,V-ring seals, globally valid

Round flange shape Silicone
Tapered hole adapter 9 Days

skf 1650 VA R Power transmission seals,V-ring seals, globally valid

30 Flange Type
Clear Anodize Deep Groove Ball Bea

skf 1140 VRME R Power transmission seals,V-ring seals, globally valid

Clear Anodize Bottom Mount
1 1/2 Single

skf 335 VE R Power transmission seals,V-ring seals, globally valid

SNR 2.78
200 °C 10.39 Hz

skf 315 VRME R Power transmission seals,V-ring seals, globally valid

6201 Available
VV (Non-Contact Rubb Flange Type

skf 360 VRME R Power transmission seals,V-ring seals, globally valid

Ball With Retaining Ring
Punching JR

skf 390 VRME R Power transmission seals,V-ring seals, globally valid

12.5 mm 14mm
15.2 kN FE207N-

skf 10 VA R Power transmission seals,V-ring seals, globally valid

40 mm 165 °C
4.6 kN 0.38 Hz
1/17